Metal bed frames are known for their durability and sleek design, but they might not always fit the aesthetic you’re aiming for in your bedroom. A DIY bed skirt can be the perfect solution to conceal the frame and add an elegant touch to your bed’s overall look. This guide will walk you through creating a bed skirt specifically designed for metal frames.
DIY Bed Skirt for Metal Frame
Creating a DIY bed skirt for a metal bed frame is a straightforward project that can significantly enhance the aesthetic appeal of your bedroom. Here’s a detailed approach:
Materials Needed:
- Fabric of Choice: Select a fabric that matches your bedroom’s décor. Consider durability and ease of cleaning. You’ll need enough fabric to cover the perimeter of your bed with a length that reaches from the top of the frame to the floor.
- Measuring Tape: To accurately measure your bed frame and the distance from the frame to the floor.
- Scissors: For cutting the fabric to the correct size.
- Velcro Strips: These will be used to attach the bed skirt to the metal frame. Ensure you have both the hook and loop sides.
- Sewing Machine or Fabric Glue: Depending on your preference for hemming the fabric edges.
Steps:
-
Measure Your Bed Frame: Start by measuring the length and width of your metal bed frame. Also, measure the height from the top of the frame (where the mattress sits) to the floor to determine how long your bed skirt needs to be.
-
Select and Prepare Your Fabric: Based on your measurements, choose a fabric that complements your bedroom’s theme. Wash and iron the fabric if necessary before cutting to prevent any future shrinkage.
-
Cut the Fabric: With your measurements in hand, cut your fabric to size, adding a few inches on each side for hemming. If your bed frame has a footboard, you may need to create separate sections for each side of the bed.
-
Hem the Edges: Hem the bottom and sides of the fabric to give your bed skirt a finished look. You can use a sewing machine for durability or fabric glue for a no-sew option.
-
Attach Velcro: Sew or glue the hook side of the Velcro strips to the top edge of your bed skirt. Place the loop side of the Velcro strips onto your metal bed frame, corresponding to where the fabric will attach.
-
Attach the Bed Skirt to the Frame: Once the Velcro is in place, align the bed skirt with the frame, pressing the fabric against the Velcro strips to secure it. Adjust as necessary to ensure a neat fit.
Enhancing your newly skirted bed with the right mattress can elevate your sleep experience to new heights. The luxurious comfort of a Puffy Lux Mattress complements the aesthetic appeal of your DIY bed skirt, ensuring both style and unparalleled comfort in your bedroom sanctuary.
Interested in how Puffy stacks up against other brands? Check out our mattress comparisons: Puffy vs Purple, Puffy vs Nectar, Puffy vs Casper, Puffy vs Leesa, Puffy vs Saatva, Puffy vs DreamCloud, and Puffy vs Tuft and Needle.
How to Put a Bed Skirt on a Metal Bed Frame
Installing a DIY bed skirt on a metal frame is simplified using the Velcro method:
-
Preparation: Begin by clearing the area around your bed frame to make the installation process easier. Remove the mattress to access the frame.
-
Attach Velcro to the Frame: Place the loop side of the Velcro strips at regular intervals along the metal frame, focusing on the head, sides, and foot of the bed. Ensure the strips are securely attached and evenly spaced.
-
Align and Attach the Bed Skirt: Starting at one corner, carefully align the top edge of the bed skirt (with the hook side of the Velcro) with the corresponding Velcro strips on the frame. Press down firmly to attach the fabric to the strips, moving around the bed until the skirt is fully in place.
-
Fine-Tuning: Once the bed skirt is attached, make any necessary adjustments to ensure it hangs evenly on all sides. This may involve repositioning some of the Velcro strips on the frame or adjusting the fabric’s placement.
-
Replace the Mattress: With the bed skirt securely attached, you can now replace the mattress. Take a moment to smooth out any wrinkles in the bed skirt and ensure it’s displaying as intended.
Incorporating a Puffy Lux Mattress on your newly skirted bed frame can significantly enhance your bedroom’s comfort and visual appeal. The luxurious feel of a the mattress, paired with your custom DIY bed skirt, creates a cozy and stylish sleeping environment.
Check out Puffy mattress reviews from real customers and see how we compare with other brands.
Tips for a Perfect DIY Bed Skirt
- Fabric Selection: Opt for durable, easy-care fabrics that complement your bedroom decor.
- Regular Maintenance: To keep your bed skirt looking its best, choose a material that’s machine washable for easy cleaning.
- Customization: Feel free to add decorative elements such as lace, trim, or embroidery to personalize your bed skirt.
Use our store locator to find the closest furniture or mattress store near you and feel the cloudlike comfort of our Puffy Mattress in person.
Conclusion
A DIY bed skirt for a metal frame is an excellent way to add elegance and hide under-bed storage, transforming your bedroom into a stylish, cohesive space. With simple materials and a bit of creativity, you can create a custom bed skirt that perfectly matches your decor and enhances the overall look of your bed.
Enjoy unmatched comfort with the Puffy Sterling Bed Frame.
Upgrade your sleep setup with a stylish, supportive foundation:
- Premium stitching.
- Heavy-duty wooden frame.
- Lifetime warranty.
- 101-night sleep trial.
- Free shipping and returns.
